Forge Specifications

We forge from 0.1 to 16 lb. forgings.
Aluminum Stock:

  • 2214-F
  • 7075-F
  • 6061-F
  • 7050-F
  • 7049-F
  • 7175-F

Precision Forging Tolerances:

  • Flash Ext. .02 Max ("0" Flash when Required)
  • Edge and Corner Radii .06 + .030 - .060
  • Internal Draft Angle 1° + 1/2° - 1°
  • External Draft Angle 0° + 0° 30' - 0° 0'
  • .xx +/- .03
    .xxx + .020 - .010
    Thickness + .020 - .010
    (Except on Coined DIM)
  • Angles +/- 0° 30'
    Straightness .016 TIR to 9.00 Inches
    Mismatch .020 Maximum on Any Part
  • Etch Line Tanks: 7 - #305 Stainless Steel

Press #1:
Tons 500
P.S.I. 2,500
Stroke 18"
Day Light 32" + 9" Bolster Plate
Ram Diameter 22"
Cylinder Diameter 6"
Bed Size 36" x 38"
Press #2:
Tons 450
P.S.I. 2,000
Stroke 12"
Day Light 16" + 4" Bolster Plate
Ram Diameter 17"
Cylinder Diameter 5"
Bed Size 24" x 25"
 
Press #3:
Tons 1,500
P.S.I. 2,500
Stroke 18"
Day Light 38"
Ram Diameter 39 1/2"
Bed Size 48" x 48"

| Home | References | Quality Control | Contact |
692 North Batavia Street • Orange, CA 92668 • Phone: (714) 997-7337 • Fax: (714) 997-7546